To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
These heavy-duty, aluminum crossbars work with Rhino-Rack legs to create a sturdy roof rack. The square bars include built-in C-channels for mounting Rhino-Rack heavy-duty, contractor-grade accessories.
Features:
Rhino-Rack HD Crossbars - Black - Qty 2:Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
What's going on, everybody Adam here with etrailer. Today, we're gonna be taking a look at this really cool track system. It is the Rhino-Rack RT-Style roof rack track system. Some vehicles, we don't have the option to put a roof rack on the roof. Kind of like our Odyssey, we have here. Usually it's because of sliding doors, but there are some other instances, where we aren't gonna be able to put a roof rack on here.
But with these rails, it's going to allow us to do that. We can do a two-bar setup, to get a lot of accessories on our roof. With the Rhino-Rack kit, we have two different cross bars to pick from, and two different colors for each. Or we can just go with the arrow cross bars. It's gonna be a little bit quieter up on your roof, a little bit more aerodynamic.
And then, we're gonna have the HD bars as well. So pick whichever ones you think is gonna be best for you. In my opinion, the arrow bars are typically the ones that are gonna work with most of your accessories. On the one side, we're gonna have an open little slot, so we don't have to remove anything, to put in our accessories. And with our towers that we're using, for the arrow bar system, all of your accessories are gonna slide in this little end cap here.
So you don't have to remove anything, which is nice. And it goes all the way along the whole entire track. So you really find out exactly where you wanna put your bars. And it's gonna accept a block that is about 1 inch by 13/16 of an inch. The Rhino-Rack system is awesome, when it comes to taking your towers and your crossbars off.
All you need is your key. You're gonna unlock this, and look at that. All you gotta do is pull these in, pull this out, and we're gonna have a little end cap here. If you wanted to take these off, all you have to do is just take the little tool, loosen it, and slide it all the way off. But I do not mind having these on here, cause it's gonna be a lot quicker than your other option, which is Thule. The Thule ones, the towers are gonna take a little bit longer to take off, but they won't leave this little bottom section. So that's kind of all up to you. I like having these here, just because it makes for adjusting the whole entire roof rack a lot quicker. And also, I just don't mind the look. I think it kind of looks cool. So, if I we're to go with one of the two kits, you have an option for, whether it's a Thule or the Rhino-Rack, I would definitely go with the Rhino-Rack. So if we wanted to go back to the bare track system, it would just loosen it up, and then you can just go ahead and slide it out and we're done. So, I think that's also gonna be quicker, than the Thule option, which is why I really like the Rhino-Rack. Of your two options, both the Thule and the Rhino-Rack, the track system is gonna be a flat black. Which I think that's the best looking, in my opinion. I don't know if it's just because of our white car, but it does look really, really good. And that's pretty much it, for a look at the Rhino-Rack RT-Style roof rack track system..
Average Customer Rating: 4.5 out of 5 stars (4 Customer Reviews)
These heavy-duty, aluminum crossbars work with Rhino-Rack legs to create a sturdy roof rack. The square bars include built-in C-channels for mounting Rhino-Rack heavy-duty, contractor-grade accessories.Ok… giving this item four stars as an overall view. The good: it fits a Jeep Wrangler perfectly. With the appropriate legs, it canvases across the entire roof of the Jeep with the legs attaching to the gutters. The bad: just a bit too noisy for my liking, even with the appropriate wind faring (I don’t expect absolute silence since I have a one touch sky top). The noise is not a big deal on short trips, but it was definitely driving my wife and kids nuts on a 2+ hour drive (stick some headphones on the kids, problem fixed)
In the future, I might switch it up from these square rails and go with something a bit more aerodynamic…
Great product sturdy bars. Keep in mind anything you install on the bars needs to have longer bolts because of how big the bars are but that's a minor detail
Kit was great, except my SnugTop cover required longer T-Bolts for mounting the tracks. The 1.5 inch ones provided were too short. It was a little tough sourcing T/Bolts that would work. It would have been nice if longer T-Bolts could have been an option from Rhino Rack.
This rack worked out great... I installed in on a 2017 Ford F-150. We drove 6 hrs through wind and rain with a SUP and Tandem Kayak on top. It really took a beating in a storm the whole way. One bracket was a little loose and shifted because of the wind on the Kayak, but it held together. Super happy with Rhino rack!
This is my second Rhino-Rack. They go on very easily and hold the bikes/kayaks and even an extension ladder very well....thanks for a great product
Super solid track system and looks great. Good instructions, I followed them to a T, including purchase of metric bits and punch. Specific to my Nissan Frontier crew cab truck. A little nerve racking drilling 18 holes in the roof but turned out fine. No leaks. Works great with my Yakima landing pads and rack. No interference with sunroof components in the roof. I used a butyl mastic tape in place of the recommended sealant as it wasn’t available in the US. Nice folks at etrailer helped me with that! I probably didn’t need to but I smeared a bit of silicone on top of every rivet head inside the track once it was installed. The end caps fit nice and flush on the roof unlike the Yakima end caps that will have a gap if there is any curvature in the mounting surface.
Easy to assemble and works great. The rack is very solid.
I used the crossbar on the front of my UTV rollbar to hold a LED light and two sun visors. It worked perfectly. I used rollbar clamps made to fit the rollbar to hold the crossbar in place.
There was a small delay in shipping but I was contacted quickly by phone with a follow up email. Everything arrived sooner than I expected. The Rhino roof racks mounted easily and look good. Excellent customer service.
Mostly satisfied. Not issue of etrailers and nothing really wrong with the product but do find it funny and a bit dumb that RhinoRack gives you security screws to hold feet to track but the rails are attached with a standard bolt that can be easily seen and accessed by anyone.
Great quality
Well engineered rack that fits my Ram 2500 crew cab well. A bit of wind noise at highway speeds. I have the heavy duty cross pieces with a square cross section.
Excellent Product. Well Constructed, Definitely more wind resistance noise than I care for.
Easy to assemble and install. Vibrates a bit driving and worse with a head wind. Overall happy with my purchase
Nice rack system, strong and durable. Used on a Ford e350 to mount solar panels. Only draw back, one of the L brackets that goes under the rain gutter was not bent square enough and this caused the bracket to slide off when tightened. I had to adjust this with a clamp and hammer, no issues since.
I was building a rack for the skin on frame sailboat I built. I needed a crossbar on the top of my truck but the tracks were longer than I needed. I ended up cutting one of the tracks in half and redrilling the holes for the end caps on the cut ends. It was a little difficult to bend the track along the curved profile of my 2019 Ram Classic roof and get the holes where I needed. It says not to use a pop riveter but I didn't have a pneumatic one and have very good grip strength. I needed every bit of my grip strength in both hands to make it work but it did, in fact work. I used tape to cover the track around the rivets and prevent scratches because when the rivets pop, it's a little out of control. Overall it turned out well. I ended up machining a custom crossbar and T nuts due to having a machine shop on my garage.
I got the roof rack mounted anyways. Better pics to come when it's all finished!
This rack works perfectly on my Nissan Versa for carrying my two Perception Sound 9'6" kayaks. The Rhino-Racks look good to me. The kayaks can rest directly on the rubber pads on the rails, unlike the Yakama racks I had in the past that had bare pipe rails. Also, I expect I can buy parts to adapt this product to a different car without having to buy new towers. I am sorry there are not hooks or loops to attach bungees when carrying lumber. They are noisy in the wind, but less so when carrying the kayaks.
I’ve had this rhino rack for over 3 years and it’s been excellent on long road trips to the ski slopes. A year after my purchase, I realized that I was missing the plastic coverings that attached to the end of the bars and called their customer service to resolve the missing pieces. I was impressed with their quick response and seamless delivery.
Do you have a question about this Roof Rack?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.